Picoleaf CLI

Use picoleaf to control Nanoleaf light panels.

Setup 1. Find Nanoleaf IP: Check router or use mDNS: dns-sd -Z _nanoleafapi 2. Generate token: Hold power button 5-7 sec until LED flashes, then within 30 sec run: curl -iLX POST http://<ip>:16021/api/v1/new 3. Create config file ~/.picoleafrc: ini host=<ip>:16021 access_token=<token>

Power - picoleaf on - Turn on - picoleaf off - Turn off

Brightness - picoleaf brightness <0-100> - Set brightness percentage

Colors - picoleaf rgb <r> <g> <b> - Set RGB color (0-255 each) - picoleaf hsl <hue> <sat> <light> - Set HSL color - picoleaf temp <1200-6500> - Set color temperature in Kelvin

Examples - Warm dim light: picoleaf on && picoleaf brightness 30 && picoleaf temp 2700 - Bright blue: picoleaf on && picoleaf brightness 100 && picoleaf rgb 0 100 255 - Turn off: picoleaf off

Notes - Default port is 16021 - Token generation requires physical access to the Nanoleaf controller - Multiple commands can be chained with &&