XFlows Cross-Chain Bridge

Operate the xflows CLI to perform cross-chain bridge transactions via the Wanchain XFlows protocol, as well as same-chain native token and ERC20 token transfers.

Prerequisites

Ensure xflows is installed: npm install -g xflows. Verify with xflows --version.

Core Workflow

For any cross-chain transfer, follow this sequence:

1. Wallet -- Ensure a wallet exists (xflows wallet list), create if needed
2. Discover -- Find supported chains, tokens, and pairs for the route
3. Quote -- Get estimated output and fees
4. Send -- Execute with --dry-run first, then for real
5. Track -- Monitor status until completion

Command Quick Reference

See references/commands.md for complete flag details.

Wallet Management

xflows wallet create --name <n>                                    # new wallet
xflows wallet create --name <n> --encrypt --password <pw>          # encrypted
xflows wallet create --name <n> --private-key 0x...                # import key
xflows wallet list                                                 # list all
xflows wallet show --name <n> [--password <pw>]                    # show key
xflows wallet balance --name <n> --chain-id <id> [--password <pw>] # balance (own wallet)
xflows wallet balance --address <addr> --chain-id <id>             # balance (any address)
xflows wallet token-balance --name <n> --chain-id <id> --token <addr> [--decimals <n>] [--password <pw>] [--rpc <url>] # ERC20 balance (own wallet)
xflows wallet token-balance --address <addr> --chain-id <id> --token <addr> [--decimals <n>] [--rpc <url>] # ERC20 balance (any address)
xflows wallet delete --name <n> --force                            # delete

Query Routes

xflows chains [--chain-id <id>] [--quix]          # supported chains
xflows tokens [--chain-id <id>] [--quix]          # supported tokens
xflows pairs --from-chain <id> [--to-chain <id>]  # bridgeable pairs
xflows bridges                                     # available bridges
xflows dexes                                       # available DEXes
xflows rpc                                         # configured RPC endpoints

Quote

xflows quote 
  --from-chain <id> --to-chain <id> 
  --from-token <addr> --to-token <addr> 
  --from-address <addr> --to-address <addr> 
  --amount <amount> 
  [--bridge wanbridge|quix] [--slippage 0.01] [--dex wanchain|rubic]

Send Transaction

xflows send 
  --wallet <name> [--password <pw>] 
  --from-chain <id> --to-chain <id> 
  --from-token <addr> --to-token <addr> 
  --to-address <addr> --amount <amount> 
  [--bridge wanbridge|quix] [--slippage 0.01] [--dry-run] [--gas-limit <n>] [--rpc <url>]

Transfer (Same-Chain Native Token)

xflows transfer --wallet <name> --chain-id <id> --to <addr> --amount <amount> 
  [--password <pw>] [--rpc <url>] [--gas-limit <n>] [--dry-run]

Transfer Token (Same-Chain ERC20)

xflows transfer-token --wallet <name> --chain-id <id> 
  --token <addr> --to <addr> --amount <amount> 
  [--decimals <n>] [--password <pw>] [--rpc <url>] [--gas-limit <n>] [--dry-run]

• Auto-detects token decimals and symbol from the contract (or use --decimals to override)
• Checks token balance before sending

Track Status

xflows status 
  --hash <txHash> 
  --from-chain <id> --to-chain <id> 
  --from-token <addr> --to-token <addr> 
  --from-address <addr> --to-address <addr> 
  --amount <amount> 
  [--poll --interval 10]

Key Concepts

Token Addresses

• Native tokens (ETH, BNB, MATIC, WAN, etc.): 0x0000000000000000000000000000000000000000
• ERC-20 tokens: find via xflows tokens --chain-id <id>

Common Chain IDs

Chain	ID	Chain	ID
Ethereum	1	Arbitrum	42161
BSC	56	Optimism	10
Polygon	137	Base	8453
Avalanche	43114	Wanchain	888

Query Any Address Balance

Both wallet balance and wallet token-balance support --address to query any address without needing a local wallet:

# Check any address's ETH balance
xflows wallet balance --address 0xd8dA6BF26964aF9D7eEd9e03E53415D37aA96045 --chain-id 1

# Check any address's USDC balance
xflows wallet token-balance --address 0xd8dA6BF26964aF9D7eEd9e03E53415D37aA96045 
  --chain-id 1 --token 0xA0b86991c6218b36c1d19D4a2e9Eb0cE3606eB48

Provide either --name (local wallet) or --address (any address). When --address is used, no wallet file or password is needed.

Encrypted Wallets

When a wallet was created with --encrypt, every command that uses the private key (send, transfer, transfer-token, wallet show, wallet balance) requires --password <pw>.

Wanchain Gas Rule

Sending from Wanchain (chainId 888) automatically enforces minimum gasPrice of 1 gwei. No manual action needed.

Status Codes

Code	Meaning	Terminal?
1	Success	Yes
2	Failed	Yes
3	Processing	No
4/5	Refunded	Yes
6	Trusteeship (manual intervention)	Yes
7	Risk transaction (AML flagged)	Yes

Patterns

Find a Token Address

xflows tokens --chain-id 1 | jq '.data[] | select(.tokenSymbol == "USDC")'

Safe Execution (always dry-run first)

# Preview
xflows send --wallet alice --from-chain 1 --to-chain 56 
  --from-token 0x0000000000000000000000000000000000000000 
  --to-token 0x0000000000000000000000000000000000000000 
  --to-address 0xRecipient --amount 0.1 --dry-run

# Execute (remove --dry-run)
xflows send --wallet alice --from-chain 1 --to-chain 56 
  --from-token 0x0000000000000000000000000000000000000000 
  --to-token 0x0000000000000000000000000000000000000000 
  --to-address 0xRecipient --amount 0.1

Same-Chain Native Transfer

# Send 0.1 ETH on Ethereum
xflows transfer --wallet alice --chain-id 1 --to 0xRecipient --amount 0.1

# Dry run first
xflows transfer --wallet alice --chain-id 1 --to 0xRecipient --amount 0.1 --dry-run

Same-Chain ERC20 Transfer

# Send 100 USDC on Ethereum (auto-detect decimals)
xflows transfer-token --wallet alice --chain-id 1 
  --token 0xA0b86991c6218b36c1d19D4a2e9Eb0cE3606eB48 
  --to 0xRecipient --amount 100

# Specify decimals manually
xflows transfer-token --wallet alice --chain-id 1 
  --token 0xA0b86991c6218b36c1d19D4a2e9Eb0cE3606eB48 
  --to 0xRecipient --amount 100 --decimals 6

Poll Until Complete

xflows status --hash 0xTxHash 
  --from-chain 1 --to-chain 56 
  --from-token 0x0000000000000000000000000000000000000000 
  --to-token 0x0000000000000000000000000000000000000000 
  --from-address 0xSender --to-address 0xReceiver 
  --amount 0.1 --poll --interval 10